Hey, new guy here could use some help.
Posted: Mon Apr 24, 2017 11:07 am
Hello, nice to meet you all .
The problem I am having is that when I load network play and accept the terms and conditions after selecting previous connection in File 1 it loads for a very long time and I get taken back to the main menu.
Thanks in advance!
Edit: also dumped my log below if that helps.
The problem I am having is that when I load network play and accept the terms and conditions after selecting previous connection in File 1 it loads for a very long time and I get taken back to the main menu.
Thanks in advance!
Edit: also dumped my log below if that helps.
Code: Select all
IOP Realtime Kernel Ver. 2.2
Copyright 1999-2002 (C) Sony Computer Entertainment Inc.
Reboot service module.(99/11/10)
cdvd driver module version 0.1.1 (C)SCEI
Load File service.(99/11/05)
Multi Threaded Fileio module.(99/11/15)
iop heap service (99/11/03)
USB Driver (Version 1.1.0)
SoundDriver : Ver2.0 (Oct 24 2003 15:06:40) (C)CAPCOM
CRI ADX Driver Ver.8.82(Aug 11 2003 11:11:48)
CRI ADX Driver : Debug flag = 0
CRI ADX Driver : Main Thread Priority = 39
CRI ADX Driver : PSM Thread Priority = 39
CRI ADX Driver : DTX Thread Priority = 48
CRI ADX Driver : SPU CORE Number = 1
loadmodule: fname cdrom0:¥MODULES¥DEV9.IRX;1 args 0 arg
dev9: CXD9611 detected.
CLR_DEV9:SMAP Information: 4 : BD byteswapping enabled
CLR_DEV9:SMAP Error: 4 : SMAP_R_EMAC3_TxMODE1_L 32bit write 380F0000
CLR_DEV9:SMAP Error: 4 : Adapter Detection Hack - Resetting RX/TX
dev9: Speed chip: ES2
dev9: CXD9611(ssbus buffer) driver start
loadmodule: id 36, ret 0
loadmodule: fname cdrom0:¥MODULES¥ATAD.IRX;1 args 0 arg
ATA: error: there is no hdd
loadmodule: id 37, ret 1
loadmodule: fname cdrom0:¥MODULES¥USBD.IRX;1 args 0 arg
loadmodule: id 38, ret 1
loadmodule: fname cdrom0:¥MODULES¥USBKB.IRX;1 args 16 arg keybd=1
USB Keyboard Driver 1.03
Max Keyboards : 1
Debug level : 0
loadmodule: id 39, ret 2
Setup DVD file system.
PS2RNA: sceSifAllocIopHeap(66624) ret=0x00051600
PS2RNA: sceSifAllocIopHeap(2256) ret=0x00061c00
PS2RNA: sceSifAllocIopHeap(4160) ret=0x00062500
loadmodule: fname cdrom0:¥MODULES¥NETMOD¥AVETCP.IRX;1 args 1 arg
AVE-TCP version 0x0116 (2002/09/02)
loadmodule: id 40, ret 0
loadmodule: fname cdrom0:¥MODULES¥NETMOD¥LOADHIGH.IRX;1 args 37 arg cdrom0:¥MODULES¥NETMOD¥USBSRCH.IRX;1
Usb searcher 2002.11.08-64/U.
LoadHigh: cdrom0:¥MODULES¥NETMOD¥USBSRCH.IRX;1 42-2
loadmodule: id 41, ret 17
clear_rbuf() : Keyboard 0 is not connected.
loadmodule: fname cdrom0:¥MODULES¥NETCNF.IRX;1 args 97 arg -no_check_capacity
loadmodule: id 43, ret 2
loadmodule: fname cdrom0:¥MODULES¥NETCNFIF.IRX;1 args 22 arg thpri=123
loadmodule: id 44, ret 2
clear_rbuf() : Keyboard 0 is not connected.
loadmodule: fname cdrom0:¥MODULES¥NETMOD_E¥DEVGLUE.IRX;1 args 1 arg
AVE-TCP netdev_modem interface version 0x0112 (2003/12/22)
loadmodule: id 45, ret 0
loadmodule: fname cdrom0:¥MODULES¥NETMOD_E¥AVEDHCP.IRX;1 args 0 arg
AVE-DHCP version 0x0104 (2001/10/15)
loadmodule: id 46, ret 0
loadmodule: fname cdrom0:¥MODULES¥NETMOD¥AVEPPP.IRX;1 args 1 arg
AVE-PPP version 0x0121 (2002/10/11)
loadmodule: id 47, ret 0
loadmodule: fname cdrom0:¥MODULES¥NETMOD¥LOADHIGH.IRX;1 args 45 arg cdrom0:¥MODULES¥NETMOD_E¥SMAP.IRX;1
SMAP (Version 2.16.0)
CLR_DEV9:SMAP InCLR_DEV9:SMA Register NetDev [0]
formation: 4 : BD byteswapping disabled
module_name smap
vendor_name SCE
P Error: 4 : SMAP_R_EMAC3_TxMODE1_L 32bit write 380F0000
CLR_DEV9:SMAP Error: 4 : Adapter Detection Hack - Resetting RX/TX
device_name Ethernet (Network Adaptor)
LoadHigh: cdrom0:¥MODULES¥NETMOD_E¥SMAP.IRX;1 49-2
loadmodule: id 48, ret 17
loadmodule: fname cdrom0:¥MODULES¥NETMOD¥LOADHIGH.IRX;1 args 40 arg cdrom0:¥MODULES¥NETMOD_E¥AVEWRAPE.IRX;1
Ave wrapper 2004.01.07-9-9(1-8)/--D-V---UI-.
LoadHigh: cdrom0:¥MODULES¥NETMOD_E¥AVEWRAPE.IRX;1 51-2
loadmodule: id 50, ret 17
smap: auto mode (BMCR=0x1201 ANAR=0x400)
smap: 10BaseT Half Duplex Mode without Flow Control
CLR_DEV9:SMAP Information: 4 : wSMAP
CLR_DEV9:SMAP Information: 4 : rSMAP
CLR_DEV9:SMAP Information: 4 : wSMAP
CLR_DEV9:SMAP Information: 4 : rSMAP
clear_rbuf() : Keyboard 0 is not connected.
CLR_DEV9:Winsock Information: 8 : Creating New UDP Connection with Dest Port 53
CLR_DEV9:Winsock Information: 8 : Creating New TCP Connection with Dest Port 443
CLR_DEV9:TCPSession Error: 11200 : TCP Connection Error: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 213.120.234.114:443
CLR_DEV9:TCPSession Error: 11200 : ErrorCode: 10060
CLR_DEV9:Winsock Information: 8 : Creating New TCP Connection with Dest Port 443
CLR_DEV9:Winsock Information: 8 : Creating New TCP Connection with Dest Port 443
CLR_DEV9:TCPSession Error: 11200 : TCP Connection Error: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 213.120.234.114:443
CLR_DEV9:TCPSession Error: 11200 : ErrorCode: 10060
CLR_DEV9:TCPSession Error: 11200 : TCP Connection Error: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 213.120.234.114:443
CLR_DEV9:TCPSession Error: 11200 : ErrorCode: 10060
CLR_DEV9:Winsock Information: 8 : Creating New TCP Connection with Dest Port 443
CLR_DEV9:TCPSession Error: 11200 : TCP Connection Error: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 213.120.234.114:443
CLR_DEV9:TCPSession Error: 11200 : ErrorCode: 10060
clear_rbuf() : Keyboard 0 is not connected.
CLR_DEV9:Winsock Information: 8 : Creating New TCP Connection with Dest Port 443
CLR_DEV9:TCPSession Error: 11200 : TCP Connection Error: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 213.120.234.114:443
CLR_DEV9:TCPSession Error: 11200 : ErrorCode: 10060
CLR_DEV9:Winsock Information: 8 : Creating New TCP Connection with Dest Port 443
CLR_DEV9:Winsock Information: 8 : Creating New TCP Connection with Dest Port 443
CLR_DEV9:TCPSession Error: 11200 : TCP Connection Error: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 213.120.234.114:443
CLR_DEV9:TCPSession Error: 11200 : ErrorCode: 10060
CLR_DEV9:TCPSession Error: 11200 : TCP Connection Error: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 213.120.234.114:443
CLR_DEV9:TCPSession Error: 11200 : ErrorCode: 10060
CLR_DEV9:Winsock Information: 8 : Creating New TCP Connection with Dest Port 443
CLR_DEV9:TCPSession Error: 11200 : TCP Connection Error: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 213.120.234.114:443
CLR_DEV9:TCPSession Error: 11200 : ErrorCode: 10060
CLR_DEV9:SMAP Information: 4 : wSMAP
CLR_DEV9:SMAP Information: 4 : wSMAP
CLR_DEV9:SMAP Information: 4 : wSMAP
CLR_DEV9:SMAP Information: 4 : wSMAP
CLR_DEV9:SMAP Information: 4 : wSMAP